Industrial Surface Temperature Sensorfor monitoring the surface of pipes and cables
Some of our customers:
key sensor features
Industrial sensor designed to be attached to a cable or pipe and monitor its temperature.
- measures surface temperatures from -55°C to +125°C
- resolution: 0.1°C
- with a ±0.5°C accuracy in the range -10°C to +85°C.
- plastic enclosure for safety.
- attached to cable via zip tie or hose clamp.
- 2m/6ft sensor cable to sensor enclosure.
- compact plug & play sensor.
- designed for indoor use.
- steel enclosure for non-power sensors or non-IP sensors.
- custom color & logo options available.
- industrial grade.
- 0u rack, DIN rail, magnetic or wall mountable sensor.
- plugs into the base unit.
- powered by the base unit (PoE, 12v DC, optionally 24v or -48v)
- alerts via SNMP Traps, email or SMS.
- out of the box integration via Modbus TCP, SNMP.
- optional integration via MQTT for Industrial IoT applications1
.
1Requires BASE-XXX-6
- measures surface temperatures from -55°C to +125°C- resolution: 0.1°C
- with a ±0.5°C accuracy in the range -10°C to +85°C.
- plastic enclosure for safety.
- attached to cable via zip tie or hose clamp.
- 2m/6ft sensor cable to sensor enclosure.
- compact plug & play sensor.
- designed for indoor use.
- steel enclosure for non-power sensors or non-IP sensors.
- custom color & logo options available.
- industrial grade.
- 0u rack, DIN rail, magnetic or wall mountable sensor.
- plugs into the base unit.
- powered by the base unit (PoE, 12v DC, optionally 24v or -48v)
- alerts via SNMP Traps, email or SMS.
- out of the box integration via Modbus TCP, SNMP.
- optional integration via MQTT for Industrial IoT applications1
.1Requires BASE-XXX-6
RS485 (Modbus RTU) version
Looking to integrate this sensor with your own gateway or industrial control system? For large accounts customers or OEMs we now do offer a RS-485 version of this sensor. It has the same specs as the normal sensor. However rather than talking to our base unit and then communicate over industrial protocols with 3rd party systems, this version allows for native integration bypassing our base units.
It offers the same features as our regular sensors but with following differences:
- RS485 Modbus RTU output
- individually addressable using dial switch
- 256 addresses available
- 12-24v DC input
Contact us for pricing & more info
It offers the same features as our regular sensors but with following differences:
- RS485 Modbus RTU output
- individually addressable using dial switch
- 256 addresses available
- 12-24v DC input
Contact us for pricing & more info
No PC or Software Required
The InfraSensing sensors connect to the base unit (BASE-5). The base unit is a standalone device that has its own IP address in your network. On its own it will monitor the sensor and trigger alerts via email, SNMP or optional SMS when needed.
There is no software or PC required for the sensors to run.
With our optional Monitoring Software you can centrally monitor sensors with trending and more. This is optional and not required.
Power cable temperature monitoring
Detect thermal changes on your power cables with this surface temperature sensor.
Using zip ties, the sensor is attached to the power cable and immediately starts monitoring the temperature of the power cable.
No configuration required; just plug and play.
Using zip ties, the sensor is attached to the power cable and immediately starts monitoring the temperature of the power cable.
No configuration required; just plug and play.
Monitor the temperature of pipes
Using zip ties or hose clamps the sensor can be attached to pipes to monitor the temperature of the surface of the pipes.
It can monitor the temperature of pipes in a wide range from -55°C to +125°C with a ±0.5°C accuracy in the range -10°C to +85°C
It can monitor the temperature of pipes in a wide range from -55°C to +125°C with a ±0.5°C accuracy in the range -10°C to +85°C