Extreme low temperature monitoring digital sensor for cryogenic temperatures of up to -196°C
The stainless steel temperature sensor was designed to monitor temperature in applications where our traditional temperature sensors can't be used.
With its IP65 rated enclosure and stainless steel protected platinum wired sensor, this sensor can be used in extreme low temperature environments of up to almost -200° Celsius or 73° Kelvin
For example this enables the monitoring of ultra low freezers like the ones being used for the storage of Covid-19 vaccines. It can also be used in applications using cryogenic freezers, freezing storage or simple cold storage.
With its IP65 rated enclosure and stainless steel protected platinum wired sensor, this sensor can be used in extreme low temperature environments of up to almost -200° Celsius or 73° Kelvin
For example this enables the monitoring of ultra low freezers like the ones being used for the storage of Covid-19 vaccines. It can also be used in applications using cryogenic freezers, freezing storage or simple cold storage.
Key sensor features
- 30-50mm stainless steel probe
- probe temperature range of up to -196°C, 73°K or -320°F.
- precision of of ±0.1șC (0.18°F)
- class DIN B accuracy of ±0.5-1°C
- 2m teflon cable between sensor and electronics enclosure
- compact plug & play sensor.
- designed for indoor use.
- steel enclosure for non-power sensors or non-IP sensors.
- custom color & logo options available.
- industrial grade.
- 0u rack, DIN rail, magnetic or wall mountable sensor.
- plugs into the base unit.
- powered by the base unit (PoE, 12v DC, optionally 24v or -48v)
- alerts via SNMP Traps, email or SMS.
- out of the box integration via Modbus TCP, SNMP.
- optional integration via MQTT for Industrial IoT applications1
.
- optional integration via RS-485 enabling direct integration with your own gateway & controllers.2
1Requires BASE-XXX-6
2Some sensors are not available in RS-485 native versions. In that case RS-485 is available using the optional Modbus RTU module.
- probe temperature range of up to -196°C, 73°K or -320°F.
- precision of of ±0.1șC (0.18°F)
- class DIN B accuracy of ±0.5-1°C
- 2m teflon cable between sensor and electronics enclosure
- compact plug & play sensor.
- designed for indoor use.
- steel enclosure for non-power sensors or non-IP sensors.
- custom color & logo options available.
- industrial grade.
- 0u rack, DIN rail, magnetic or wall mountable sensor.
- plugs into the base unit.
- powered by the base unit (PoE, 12v DC, optionally 24v or -48v)
- alerts via SNMP Traps, email or SMS.
- out of the box integration via Modbus TCP, SNMP.
- optional integration via MQTT for Industrial IoT applications1
.- optional integration via RS-485 enabling direct integration with your own gateway & controllers.2
1Requires BASE-XXX-6
2Some sensors are not available in RS-485 native versions. In that case RS-485 is available using the optional Modbus RTU module.
RS485 (Modbus RTU) version
Looking to integrate this sensor with your own gateway or industrial control system? For large accounts customers or OEMs we now do offer a RS-485 version of this sensor. It has the same specs as the normal sensor. However rather than talking to our base unit and then communicate over industrial protocols with 3rd party systems, this version allows for native integration bypassing our base units.
It offers the same features as our regular sensors but with following differences:
- RS485 Modbus RTU output
- individually addressable using dial switch
- 256 addresses available
- 12-24v DC input
Contact us for pricing & more info
It offers the same features as our regular sensors but with following differences:
- RS485 Modbus RTU output
- individually addressable using dial switch
- 256 addresses available
- 12-24v DC input
Contact us for pricing & more info
No PC or Software Required
The InfraSensing sensors connect to the base unit (BASE-5). The base unit is a standalone device that has its own IP address in your network. On its own it will monitor the sensor and trigger alerts via email, SNMP or optional SMS when needed.
There is no software or PC required for the sensors to run.
With our optional Monitoring Software you can centrally monitor sensors with trending and more. This is optional and not required.